You have no items in your shopping cart.
Close
Search
Filters
Our ANTON range covers dining and living rooms.ANTON has sizeable, whitewashed, solid acacia wood legs and frames, with matt white tops.
$899.00
$649.00 ($5.94 per week*)

* Approximately, based on a 36 month loan agreement. Minimum loan amount (order total) $500. Visit our Finance Guide for more details.


Our ANTON range covers dining and living rooms.The tops of all the Anton range are made from Reinforced Cement Fiberboard with a hardened finish. 

ANTON has sizeable, whitewashed, solid acacia wood legs and frames, with matt white tops. Its look and feel is 'Coastal'-cool and relaxed. Doors are held closed by magnetic catches, while drawers glide open and shut on metal runners.


FEATURES:
* Substantial, solid acacia wood legs and frames, matt white concrete table tops 
* 'Coastal' look and feel
* Magnetic door catches, metal drawer runners

Measurement:cm

W210 D100 H78

*Assembly needed, only leg part.

Product Cleaning Care:

Product Details 

ANTON Tops are made from Reinforced Cement Fiberboard with a hardened finish.

The specially formulated finish makes for a hard-wearing cement finish, that is more scratch resistant than most cement products in the market today. The design features generous proportions and a unique effect on solid wood cabinet and legs

 The Finishing on the top is 3 coats of Polyurethane based Pigment finishing. This finish is water proof and stain resistant.

To Clean

To clean the cement top, use a light application of gentle surface cleaners / soaps and wipe with a soft cloth, and avoid bleach or abrasive pads/sponges. Abrasive materials may cause micro scratches that will further hold dirt and stains.

On the timber cabinets part, only use a damp cloth with water. Avoid soap / detergents like all timber furniture products. Avoid oils and stains, as they are not suitable for modern wire brushed finishes. As a general tip, avoid microfiber cloth for wire brushed products as they are more likely to snag onto the wood fibers. Paper towels, and cotton cloth would work better.

 General Care

Make sure to avoid direct sunlight on any timber, painted or fabric products. Strong sunlight can cause colour fading unevenly on the sections exposed.

 Also avoid placing the furniture within 1-2 meters to a heater or fireplace. Timber products will expand and contract with temperature changes. If subjected to a strong source of heat, especially unevenly, it will be much more likely to crack / split. This applies to all timber products.

Check our ANTON collection...

 


Our ANTON range covers dining and living rooms.The tops of all the Anton range are made from Reinforced Cement Fiberboard with a hardened finish. 

ANTON has sizeable, whitewashed, solid acacia wood legs and frames, with matt white tops. Its look and feel is 'Coastal'-cool and relaxed. Doors are held closed by magnetic catches, while drawers glide open and shut on metal runners.


FEATURES:
* Substantial, solid acacia wood legs and frames, matt white concrete table tops 
* 'Coastal' look and feel
* Magnetic door catches, metal drawer runners

Measurement:cm

W210 D100 H78

*Assembly needed, only leg part.

Product Cleaning Care:

Product Details 

ANTON Tops are made from Reinforced Cement Fiberboard with a hardened finish.

The specially formulated finish makes for a hard-wearing cement finish, that is more scratch resistant than most cement products in the market today. The design features generous proportions and a unique effect on solid wood cabinet and legs

 The Finishing on the top is 3 coats of Polyurethane based Pigment finishing. This finish is water proof and stain resistant.

To Clean

To clean the cement top, use a light application of gentle surface cleaners / soaps and wipe with a soft cloth, and avoid bleach or abrasive pads/sponges. Abrasive materials may cause micro scratches that will further hold dirt and stains.

On the timber cabinets part, only use a damp cloth with water. Avoid soap / detergents like all timber furniture products. Avoid oils and stains, as they are not suitable for modern wire brushed finishes. As a general tip, avoid microfiber cloth for wire brushed products as they are more likely to snag onto the wood fibers. Paper towels, and cotton cloth would work better.

 General Care

Make sure to avoid direct sunlight on any timber, painted or fabric products. Strong sunlight can cause colour fading unevenly on the sections exposed.

 Also avoid placing the furniture within 1-2 meters to a heater or fireplace. Timber products will expand and contract with temperature changes. If subjected to a strong source of heat, especially unevenly, it will be much more likely to crack / split. This applies to all timber products.

Check our ANTON collection...

 

For small flat pack items like cloth rack, shipping cost is from $5 via normal courier.
Large items like tallboys and couches are delivered by our own team or third party furniture movers, with a shipping cost from $65

Please check our Shipping Guide for more details.

We stand behind all our products. Unless specially stated, all of our products carry:

  • 7 Days Money Back Guarantee*
  • a 12 month RTB warranty* 

*Please check our Warranty & Refund Policy for details.

*
*
*
*